Well I Solved My Problem With My Garrett Infinium That I Experienced Last Year

John-Edmonton

Silver Member
Joined
Mar 21, 2005
Messages
4,410
Reaction score
3,980
Golden Thread
0
Location
Canada
Detector(s) used
Garrett- Master Hunter CX,Infinium, 1350, 2500, ACE 150-water converted 250, GTA 500,1500 Scorpion, AT Pro
I bought a larger sand scoop for out in the water. The Infinium picks up targets son darned deep last year I sometimes had to dig 6-7 scoops of sand before I would snag that ring.

But No More...... ;D

I bought that large monster stainless steel scoop :o shown on the left side of the pic below. Now I can save lots of time by not digging soooooooo many scoops of sand.


sswaterscoopww4.jpg
 

Re: Well I Solved My Problem With My Garrett Infinium That I Experienced Last Ye

John....... thats what I'Mmm talking about......Rdi
 

Been looking at that same scoop. I will most likely have one soon myself. I am wondering if they will make me one with more of the smaller holes along the bottom of the scoop. I chase lots of small targets here in Florida such as lead weights, etc., that get out of the larger holes too easily. I was thinking more of the smaller holes along the bottom side with the larger holes starting just a bit up the sides would help this.
 

Re: Well I Solved My Problem With My Garrett Infinium That I Experienced Last Ye

I have one and even with the 1/2 inch holes it is a problem getting the shells out of the scoop. The LS hits deep and on the second scoop I am in the heavy shells here and it takes forever to get them out. I have been thinking of enlarging mine and the heck with the sinkers.
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top Bottom