Molewacker
Bronze Member
- #1
Thread Owner
Due to recent surveys, we found our metal pole barn (24'x48') is 40' on neighbors side and he would like it gone this year so he can do his shop. 
If we were 20+ years younger, I'd be out there dismantling it for building materials to shelter rv/storage which we need, but only 1/2 the size. My other half not into it.
Now I'm thinking about selling for salvage to offset new building costs. I see on CL where folks sell individual metal panels 1-2 dollars lineal ft. Roof was refreshed last year with insulation, wall panels, a few have some dents on bottom. 12' panels on one side, 10' on other, 2 12' sliding doors.
Material cost in 95 was 13,000 - but don't know what wood could be salvaged.
Of course I would have to make sure neighbor or myself are covered liability wise if the salvager falls off the roof or such.
Totally open to suggestions, thoughts, musings! Didn't expect this a year into retirement.
Thanks all!

If we were 20+ years younger, I'd be out there dismantling it for building materials to shelter rv/storage which we need, but only 1/2 the size. My other half not into it.
Now I'm thinking about selling for salvage to offset new building costs. I see on CL where folks sell individual metal panels 1-2 dollars lineal ft. Roof was refreshed last year with insulation, wall panels, a few have some dents on bottom. 12' panels on one side, 10' on other, 2 12' sliding doors.
Material cost in 95 was 13,000 - but don't know what wood could be salvaged.
Of course I would have to make sure neighbor or myself are covered liability wise if the salvager falls off the roof or such.
Totally open to suggestions, thoughts, musings! Didn't expect this a year into retirement.
Thanks all!