scrounger d detector collector
Bronze Member
- Joined
- Aug 27, 2006
- Messages
- 1,643
- Reaction score
- 3
- Golden Thread
- 0
- Detector(s) used
- MINELAB E TRAC, EXCAL2,QUATTRO,WHITE 6000 DI PRO SL,EAGLE SPECTRUM,SILVER UMAX ,BANDIDO UMAX VARIOUS VINTAGE
- #1
Thread Owner
i bought a new coinmaster mid summer.
got a lot of different machines to play with and i like it
that way.
of all the machines i had none had a progressive screen
setup and i thought it might help finding gold.
well the digital jumps around so bad is kinda useless.
so i used it a few times clearing surface targets for the
etrac. only a few days after buying it i found the used
6000 di sl xb for 80 bux. i fell so in love w it that
the coinmaster set there not used.
finally today a situation arose where i needed it.
i had been out a good part of the day hunting w the 6000.
after some errands, i was ready to go to the park again.
i had 5 machines in the car but 3 were too heavy.
the 2 lighter ones were bandito umax and coinmaster.
i started w the bandido but by then it was getting dark
and no light just a pp.
i kept bumping the ground knob etc on the tesoro
putting it out of tune.
OK COINMASTER GO. NOW IS UR CHANCE.
SHOW ME WHAT U CAN DO.
I knew i would not be bumping any controls becuz
digital pad.
i hadnt used it in hi discrim b4. i was using in
low dicrim and trying to id jewelry.
imagine my horror when i found out once u try hi discrim.
the blip tone it gives on a false is about the same as a good
signal.
what this means folksis.everytime it falses u must double
check that false to make sure ur not missing a good signal.
talk about xtra effort ugh.
save urself some money n headaches. this cant hold a candle to a
compadre or a used silver umax. in fact for the 200
u end up paying either in shipping or sales tax. 179 plus.
many used older tesoro or whites or fisher would be better
than this machine.
i fooled w the sens and thats the only other control.
didnt help much.
tell my if or why im wrong.
got a lot of different machines to play with and i like it
that way.
of all the machines i had none had a progressive screen
setup and i thought it might help finding gold.
well the digital jumps around so bad is kinda useless.
so i used it a few times clearing surface targets for the
etrac. only a few days after buying it i found the used
6000 di sl xb for 80 bux. i fell so in love w it that
the coinmaster set there not used.
finally today a situation arose where i needed it.
i had been out a good part of the day hunting w the 6000.
after some errands, i was ready to go to the park again.
i had 5 machines in the car but 3 were too heavy.
the 2 lighter ones were bandito umax and coinmaster.
i started w the bandido but by then it was getting dark
and no light just a pp.
i kept bumping the ground knob etc on the tesoro
putting it out of tune.
OK COINMASTER GO. NOW IS UR CHANCE.
SHOW ME WHAT U CAN DO.
I knew i would not be bumping any controls becuz
digital pad.
i hadnt used it in hi discrim b4. i was using in
low dicrim and trying to id jewelry.
imagine my horror when i found out once u try hi discrim.
the blip tone it gives on a false is about the same as a good
signal.
what this means folksis.everytime it falses u must double
check that false to make sure ur not missing a good signal.
talk about xtra effort ugh.
save urself some money n headaches. this cant hold a candle to a
compadre or a used silver umax. in fact for the 200
u end up paying either in shipping or sales tax. 179 plus.
many used older tesoro or whites or fisher would be better
than this machine.
i fooled w the sens and thats the only other control.
didnt help much.
tell my if or why im wrong.