twistidd
Bronze Member
- Nov 11, 2007
- 1,789
- 3
- Detector(s) used
- White's Matrix M6 w/ Sun-Ray DX-1, 950 coil and 6x10 DD, Minelab Excalibur II, Garrett Ace 250, Garmin Etrex GPS
I was cleaning the M6 tonight, end-of-season bath time for the detector. I could hear that there were dirt particles inside the control housing and so I removed the cover, and some very find dirt particles came out. The only way they could have gotten in there is from the speaker holes. Do any of you tape or otherwise cover up those holes so that dirt doesn't get in there and damage the circuitry? I get really dirty with the M6, mostly hunt the woods. I also always use headphones so it shouldn't make a difference, I just want to see what you guys think and if any of you have ever done this before. Thanks!
Joe
Joe