fisher cz-7a tips & advice

[fast43]

I used to metal detect back in the 70's and I found a CZ-7a last weekend for $50 and bought it. Now I'm trying to figure out the settings on it. I found and downloaded a manual for the cz-7a Pro. Is this the same model?

So far I'm pretty impressed with this machine. So far in about 30 minutes of using this I found a quarter that was on it's edge about 6 inches deep and a copper penny.

Any advice on how to tweek the settings and any other advice would be appreciated.

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[Sandman]

I guess nobody else is going to help ya so I'll give it a shot. Fisher Research Cz-7a Metal Detector | Lost Treasure Online - Official Website of Lost Treasure Magazine

 

[woof!]

Thanks, Sandman. I'm not familiar with that model since it was designed after I left the "old Fisher".

If it works good and only cost $50, ........ !!!!!!!

--Dave J.

 

[lost hunter]

Get hold of NASA Tom he should be able to help you out

 

[fast43]

thanks for the review. I'm starting to figure it out. So far I found 32 coins in about three hours of hunting. The one thing that I've discovered is that a bent rusty nail signals the same as a quarter.

 

[fast43]

If it works good and only cost $50, ........ !!!!!!!

--Dave J.

Works real good, the first coin I found was a quarter on it's edge 6 inches deep

 

[lost hunter]

Wtg