Re: Guy's,take a look......
I'd like to know the same thing....
old_mikee said:
I'd like to know the same thing....
Guys,take a look......
- Thread starter nottinon
- Start date
russau
Gold Member
Re: Guy's,take a look......
yep i like your adjustable sluice stand with the side supports for the plastic sluice. if you dont mind id like to make one from your picture for my La Trap sluice.
yep i like your adjustable sluice stand with the side supports for the plastic sluice. if you dont mind id like to make one from your picture for my La Trap sluice.
Doug Watson
Sr. Member
- Jul 29, 2010
- 330
- 154
Re: Guy's,take a look......
For the stand go to this website http://www.angusmackirk.com/product_pages/streambanker.html and look under green machines and you'll see the stand and sluice. Doug.
For the stand go to this website http://www.angusmackirk.com/product_pages/streambanker.html and look under green machines and you'll see the stand and sluice. Doug.
old_mikee
Jr. Member
- May 26, 2007
- 22
- 5
- Detector(s) used
- Whites MXT; Minelab XTerra 70
- Primary Interest:
- Metal Detecting
Re: Guy's,take a look......
Thanks Doug..... much appreciated
mike
Thanks Doug..... much appreciated
mike
freddy williams
Hero Member
- Oct 9, 2010
- 882
- 92
- Detector(s) used
- GTI-2500, Whites V3, xplorer XS Cortes & XLT Cibola Tesoro Tiger shark Now using a Xterra 705, Ace 350...
- Primary Interest:
- All Treasure Hunting
Re: Guy's,take a look......
I would take a 5 gallon bucket drill some 3/4 inch holes around it about 4 rows 2 to 3 inches apart and line inside with a good filtration material drop in some weight and then set it in the water for my suctions hoses to set in this will keep any debri from tearing up the pump
Just an idea
I would take a 5 gallon bucket drill some 3/4 inch holes around it about 4 rows 2 to 3 inches apart and line inside with a good filtration material drop in some weight and then set it in the water for my suctions hoses to set in this will keep any debri from tearing up the pump
Just an idea
Sackett
Sr. Member
- Feb 20, 2011
- 253
- 192
- Detector(s) used
- Garrett GTA 500 (need a new/better one)
- Primary Interest:
- All Treasure Hunting
Re: Guy's,take a look......
Looks good and adds to my confidence in my Angus MacKirk Sluice!!
Looks good and adds to my confidence in my Angus MacKirk Sluice!!
OP
OP
nottinon
Jr. Member
- Thread starter
- #27
Re: Guy's,take a look......
This came with the sluce..........
I just had to re drill the holes,tha were a little tight....
Other than that,it workes great............
That is a great looking setup... I like the adjustable sluice stand and would like to ask if you fabricated that yourself or is it something already readily available?
thanks,
mike
[/quote]
This came with the sluce..........
I just had to re drill the holes,tha were a little tight....
Other than that,it workes great............
That is a great looking setup... I like the adjustable sluice stand and would like to ask if you fabricated that yourself or is it something already readily available?
thanks,
mike
[/quote]
OP
OP
nottinon
Jr. Member
- Thread starter
- #28
Re: Guy's,take a look......
Thanks for the tipp......
I will use it....
I would take a 5 gallon bucket drill some 3/4 inch holes around it about 4 rows 2 to 3 inches apart and line inside with a good filtration material drop in some weight and then set it in the water for my suctions hoses to set in this will keep any debri from tearing up the pump Just an idea
[/quote]
Thanks for the tipp......
I will use it....
I would take a 5 gallon bucket drill some 3/4 inch holes around it about 4 rows 2 to 3 inches apart and line inside with a good filtration material drop in some weight and then set it in the water for my suctions hoses to set in this will keep any debri from tearing up the pump
Just an idea[/quote]
