MXT, Searching for coins using relic mode, trigger forward (alternate search)

Argentium

Gold Member
Feb 2, 2008
9,058
5,574
Santa Fe, New Mexico
Detector(s) used
Whites, MXT.
Primary Interest:
All Treasure Hunting
Hey T-netters ! I just posted this in the White's general discussion forum , thought i'd post same

here too so as to get as much input as i can. I've been experimenting with coin hunting in relic mode

with the trigger forward which alows only non ferrous targets to be heard . The old area i've been

hunting is a neglected park where i have found several silver rosies and some wheaties. Oldest coins

so far are 1940's . This relic mode - alternate search is nice because you hear a clearly discernable

high chirpy tone when you hit a penny/dime or better. I've also been using the 6x10 DD coil since

the area is trashy (deep beer cans and aluminum liquor bottle caps) and i've been running at max

discrimination with very high gain (at least+ 2) Any suggestions you may have with regard to

mode, gain , coil, or discrimination - would be greatly appreciated . Thanks , Gregory, Santa Fe.
 

Top Member Reactions

Users who are viewing this thread

Top