OPINIONS ON '39 jEFF RAISED METAL ON REVERSE

port ewen ace

Silver Member
Dec 16, 2012
4,065
7,786
port ewen ny
🏆 Honorable Mentions:
2
Detector(s) used
AT-PRO & Equinox800
Primary Interest:
All Treasure Hunting
weighs 5 Gr. raised circular lump on reverse. circular cuts on obverse

adding coin metal post strike (PMD) is a tough nut to believe, soooo.......:dontknow: IMG_1381.JPG IMG_1382.JPG
 

BigWaveDave

Gold Member
Nov 22, 2013
9,323
16,998
Mountain Maryland
🥇 Banner finds
2
🏆 Honorable Mentions:
4
Detector(s) used
Garrett AT Pro, AT Max, Minelab
Equinox 800
Primary Interest:
Metal Detecting
First impression is someone messed around with it in shop class?
No clue really.... interesting.
 

ArfieBoy

Silver Member
Aug 11, 2011
3,425
5,698
N.E. Oregon
Detector(s) used
Compass X-70, Compass X-80, Compass X-90, Compass Judge 2, Garrett AT Pro
Primary Interest:
All Treasure Hunting
That is a mark that is made by a vending machine. As it takes the coin down into the collection box, the coin gets turned in the process. Many time that process cuts into the coin, hence, the circular marks on the coin. It was pretty common in the early days of vending machines.
 

OP
OP
P

port ewen ace

Silver Member
Dec 16, 2012
4,065
7,786
port ewen ny
🏆 Honorable Mentions:
2
Detector(s) used
AT-PRO & Equinox800
Primary Interest:
All Treasure Hunting
That is a mark that is made by a vending machine. As it takes the coin down into the collection box, the coin gets turned in the process. Many time that process cuts into the coin, hence, the circular marks on the coin. It was pretty common in the early days of vending machines.

why is the reverse center raised higher than the portico?? -- that is the main mystery:dontknow:
 

l.cutler

Silver Member
Dec 2, 2006
2,671
2,016
NEPA
Detector(s) used
Tejon, Cibola, T2
Primary Interest:
All Treasure Hunting
I would say the center is not raised, the surrounding area is scraped down. Notice the scrape marks around the circle, particularly to the left.
 

Top Member Reactions

Users who are viewing this thread

Top