Another lock restoration

Dirty Digger Doug

Hero Member
Joined
Jul 17, 2020
Messages
522
Reaction score
2,979
Golden Thread
0
Location
Grand Rapids Michigan
Detector(s) used
Equinox 800
Garrett ATPro
Primary Interest:
All Treasure Hunting
Here is a lock I found. This one is all steel. 2"h x 1.5"l x 3/8w. The latch is hinged on one side with a rivet. So when it is opened it flips over instead of swiveling from side to side. The body is two plates riveted together. The key opening plates are brass. If you can give any information on it, please do.
IMG_20200805_165141235~4.webp

IMG_20200809_084711838~2.webp

IMG_20200809_084725754~2.webp
 

What restoration technique did you use ? looks great !
 

Soaked it water and vinegar for four days then wire wheel. I put some linseed oil on it to keep it from rusting. It looks real dark in the pictures but it isn't. It will lighten some in time.
 

Very nice restoration project! :icon_thumleft:
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom