Anyone have a shell setup?

[gsxraddict]

I'm running React 1 - Silencer 0
Disc 0
2 tone
freq 4


I'm trying to dig deep fragments and shells but I'm driving myself crazy digging nails and barbed wire.

I can't seem to tell the difference between a 3'' bent nail or barbed wire and a 1 foot fragment.


Does anyone have advice for digging iron?

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[vferrari]

Use pitch audio or gold field. The pitch audio of either allows you to differentiate between large iron targets (shell frags) and small targets like nails (sort of like pinpoint mode). Longer pieces of barbed wire and strap iron are just an occupational hazard in this case because they will also appear to be large. There is no magic bullet here as you are searching for big iron amongst small iron. Sometimes larger iron pieces, especially if they appear flat against the coil, will ring up with low iron ids and high IDs that go below the wraparound range (i.e., in the high 80's or low 90's but < 97) which is a telltale clue. But unfortunately bent nails and coiled iron wire will do that also.

Good luck with that.