kikinit247
Jr. Member
- Joined
- Dec 20, 2013
- Messages
- 33
- Reaction score
- 50
- Golden Thread
- 0
- Location
- Western Washington
- Primary Interest:
- Prospecting
- #1
Thread Owner
I am considering purchasing a 36" sniper, and I have a couple questions.
What size and models are people using? Water flow won't be an issue nor will drop, but $$$ is always a consideration.
Is it legal to say pull all the bigger rocks and boulders out and run material 4 inches and under? Does that qualify as classifying?
The regs are as follows:
Classify – To sort aggregate by hand or through a screen,
grizzly, or similar device to remove the larger material and
concentrate the remaining aggregate.
(e) You may process only classified aggregate within the wetted perimeter when using a sluice.
I am going to call Olympia next week to get this clarified, but was curious if anyone else knew the answer. '
Thanks in advance,
K/247
What size and models are people using? Water flow won't be an issue nor will drop, but $$$ is always a consideration.
Is it legal to say pull all the bigger rocks and boulders out and run material 4 inches and under? Does that qualify as classifying?
The regs are as follows:
Classify – To sort aggregate by hand or through a screen,
grizzly, or similar device to remove the larger material and
concentrate the remaining aggregate.
(e) You may process only classified aggregate within the wetted perimeter when using a sluice.
I am going to call Olympia next week to get this clarified, but was curious if anyone else knew the answer. '
Thanks in advance,
K/247