Button ID Needed- Updated 3/17

West Jersey Detecting

Gold Member
Joined
Oct 23, 2006
Messages
5,247
Reaction score
1,066
Golden Thread
1
Location
Philadelphia Area
🥇 Banner finds
1
🏆 Honorable Mentions:
1
Detector(s) used
Nokta Legend, Excalibur 1000/II (hybrid) , Teknetics T2 SE
Primary Interest:
Other
Well, I finally got to test out the DFX today. I only had about 45 minutes, so I ran up to the local school to test out the different settings.

I found plenty of clad, and I also dug this 2 piece button. My gut feeling is that it is a modern coat button, but I figured I better post it just the same. The back is gone, so I have no idea if there was a backmark. It appears to be brass and was a solid 23 on the VDI. It was about 3.5 inches deep. The land was once farmland, going back at least to the 1750's, possibly earlier. My oldest finds from this farmland, which includes my property, are about 150 years old.

The closest I could find was the Coat of Arms for the Netherlands (shown). THe orignal settlers were Dutch in this area, however there is no way this button dates back that far.

Can someone help on the ID? Is it old, or modern?
 

Attachments

  • P3160005.webp
    P3160005.webp
    23 KB · Views: 208
  • netherlands-coat-arms.gif
    netherlands-coat-arms.gif
    67.4 KB · Views: 162
Upvote 0
Re: Button ID Needed

Neil,
I found an almost identical button last week in a local park. Mine is 1/2 inch in diameter. It's got a back but no identifyable mark. It's gotta be from the same manufacturer.
Pete
 

Attachments

  • RBUTTON.webp
    RBUTTON.webp
    2.5 KB · Views: 171

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom