NeilinFR
Full Member
- Joined
- Oct 11, 2007
- Messages
- 235
- Reaction score
- 40
- Golden Thread
- 0
- Location
- New Jersey
- Detector(s) used
- Teknetics T2 ltd
Minelab Etrac
Xterra 705
Shadow X5
- Primary Interest:
- Beach & Shallow Water Hunting
- #1
Thread Owner
I swapped out my hardwired compadre 5.75 coil to a 8ft cabled 8" coil and now I can both wade a bit deeper with it and also use any of the 5 pin coils.
This took me a little over an hour and I took my time, Im not an electronics person. Thanks to Ski Whiz and Texastigerdiggs for their how to instructions.......I wish Tesoro would just start making custom detectors, nobody does that, seems like a great niche in the detector industry....you put an order in of what you want and they build it....kinda like Ford set up a truck I bought from them years ago...
I had to lower the sens pot for the 8" coil. The 8" coil hits the same small earrings and gold chain I tested, only about an inch farther away which is great and coins about 2" more depth. I like the 8" coil, it glides through the water so much easier than the spoked coils.
This took me a little over an hour and I took my time, Im not an electronics person. Thanks to Ski Whiz and Texastigerdiggs for their how to instructions.......I wish Tesoro would just start making custom detectors, nobody does that, seems like a great niche in the detector industry....you put an order in of what you want and they build it....kinda like Ford set up a truck I bought from them years ago...
I had to lower the sens pot for the 8" coil. The 8" coil hits the same small earrings and gold chain I tested, only about an inch farther away which is great and coins about 2" more depth. I like the 8" coil, it glides through the water so much easier than the spoked coils.