T
TreasureTales
Guest
relic lover said:OK any 60s or 70s large car with a trunk is good. The wider the car the longer the rods open the trunk under the space between the rear window and the trunk opening there are 2 spring steel rods with a bend at each end attached to the trunk lid hinges. do yourself a favor and prop up the lid first, if you are real strong you can flex them out I have done it this way but it is real tough. from then on I used a cordless sawsall! please use extreme caution! they are under twisting tension! sometimes when a car is crushed they are already loose so try that first. in any case this can be dangerous work and don't forget they are the only thong holding up the lid!
Thank you very much for the detailed info. I think I'd better not attempt to get them myself.