copper things

[FOUNDurSTUFF]

a buddy and i were finding these everywhere at this one site. some are one piece some are two piece. they had sheep, mabe something to do with that?

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[FOUNDurSTUFF]

flat piece is the size of a dime

 

[timekiller]

I would guess something to hold like tar paper or insulation on with.
Take Care,
Pete
Kinda Like This!

 

[Bigcypresshunter]

I would guess something to hold like tar paper or insulation on with.
Take Care,
Pete
Kinda Like This!

correct I think they are slate shingle nails

 

[FOUNDurSTUFF]

MAYBE DIDNT FIND ANY PLASTIC PIECES THOUGH. JUST AN OLDER STYLE?

 

[juju]

They do look like something along the lines of a Simplex Nail for roofing. Otherwise called a cap nail. Just my opinion.

JuJu

 

[artyfacts]

These were used for holding asbestos shingles. The same ones are on the captains house built in 1887 on the in-laws property, the asbestos shingles are covering the old cedar shingles. probably done in the 1930s or so. Arty

 

[traderoftreasures]

those were used to hold down insulation board and then they were tarred over with hot tar

 

[Bigcypresshunter]

http://forum.treasurenet.com/index.php/topic,154849.0.html


"Those are copper pins used to fasten down the bottom of asbestos shingles on roofs. The tops of the shingles are nailed with copper roofing nails. The flat part of the pin tucks underneath the sides of the underlying tiles while the pin sticks up through the overlying tile, which has a pre-drilled hole in it for that purpose. The pins are then bent over to hold the bottom of the overlying tile down to prevent wind uplift. These were used primarily on "diamond-shaped" asbestos tiles. (See http://www.slateroofcentral.com/asbestos-repair.html for a rough sketch of diamond asbestos tiles). The pins are situated where the tiles touch each other on the sides. At that point, the flat part of the pin slips underneath the two tiles. The overlying tile has a hole at that point and the pin sticks up through that hole , then is bent over." — Joseph Jenkins of Slate Roof Central < http://jenkinsslate.com/ >, author of The Slate Roof Bible, 2nd Edition." quote PBK

 

[sandfisher1]

Any possible way to tell the age of these pins?
I dug one is a park last night.

Thank you,
sandfisher1

 

[sutphin]

WE CALL THEM GATORS .