CZ 20 replcement battery door dilema-HELP

[GTzer]

Got my replacement battery door for my CZ 20. One capture screw is slightly out of alignment. I can deal with that.

Main issue- there is a HEAVY duty plastic array inside of the replacement door which adds about ½ inch (compared to the original). This makes it so you cannot close the battery door.
Has anyone dealt with this problem or did the wrong part or what.

I only got it because the used CZ 20 I got had cracks that you could see light through. I repaired them but I don't trust that they wouldn't open up again.

Observation-under the foam pad of the original-it looks as though some one cut that same HEAVY duty plastic array down & covered it.

I got this at the end of July and still have not tested it in the water. Another wasted day.
Any INPUT-PLEASE.

 

Amazon Forum Fav 👍

Agony and Death on a Gold Rush Steamer: The Disastrous Sinking of the Side-Wheeler Yankee Blade - Grab it through Amazon!

[bigscoop]

Call Fisher - ask to speak to Felex - explain your issue to him and he'll tell you what needs to be done.

 

[DrJoePrime]

If you got the replacement door from Fisher ... I'd go there and call them first.

I feel for your dilemma but unfortunately don't have a CZ 20.

 

[GTzer]

Thanks for the replies. Fisher is closed on Sat.
Had the car packed-just had to change the battery door and.............................

 

[GTzer]

Per Sandman-even if it says replacement for CZ 20--its a CZ 21 door. Dirty trick... but ocillating saw,nippers,dremel & sandpaper 3 hrs--it's a CZ 20 door.