Foot hill
Full Member
- Joined
- Aug 26, 2013
- Messages
- 173
- Reaction score
- 230
- Golden Thread
- 0
- Location
- Ca foot hills. (Central ca.)
- Detector(s) used
- XP Deus and tesoro compadre minelab Equinox 800
- Primary Interest:
- Relic Hunting
- #1
Thread Owner
As noticed in my coin garden deep silver (even copper) raises in number ( or no number at all) when your getting just a little sliver at upper right on meter.
This was found in 12khz. And was just a faint whisper (audio response at 5 reactivity 1 silencer 1) TID @ 96-98 and about half the time numbers not showing at all.
checked it at 8khz (wish I had checked at 4khz) and it's number stayed @ 96-98.
I might not of ever heard it with 97-99 notched out. Also, It seems that checking for numbers to drop using (ID normal off) is not effective at maximum depth.
So as always.. Dig those deep faint targets and just use ID number to get idea of shallow targets.
What have YOU found/noticed on those super faint signals?
Also post pics of those deep targets
This was found in 12khz. And was just a faint whisper (audio response at 5 reactivity 1 silencer 1) TID @ 96-98 and about half the time numbers not showing at all.
checked it at 8khz (wish I had checked at 4khz) and it's number stayed @ 96-98.
I might not of ever heard it with 97-99 notched out. Also, It seems that checking for numbers to drop using (ID normal off) is not effective at maximum depth.
So as always.. Dig those deep faint targets and just use ID number to get idea of shallow targets.
What have YOU found/noticed on those super faint signals?
Also post pics of those deep targets
Last edited:
If I can cross it in two diffrent directions,and get the same faint sound,I'm digging it!
