Define Deep?

[BamaBill]

Frequently I see the term "it was deep" bandied around without some kind of comparison or estimated depth or anything to go by. I suspect deep for a coinshooter is different from a relic hunter and different than jewerly at the beach. Also, it would help if you mention if you were just going by the reading coming off the machine or had a ruler (marked off digger counts as well), or if you have done a reasonable calibration of what the machine is telling you and go by that. The more information we have to go by the more we can understand the conditions everybody is operating under. This actually could help in judging the performance of your own machine if you know more about the type of ground, depth, and settings.

 

Amazon Forum Fav 👍

Minelab PRO-FIND 35 Waterproof Pinpointer Metal Detector for Experts with Tone ID & Adjustable Sensitivity - Grab it through Amazon!

[lostlake88]

I run a Tesoro Vaquero and find wheaties at 6" regularly. I found a V nickel at 10" (wet soil, silty loam). Most coins are less than 6" though. I loose pennies at about the 7" mark, dimes too. I think I could pull a silver quarter at 10" If I had the opportunity.

 

Amazon Forum Fav 👍

Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!

[Ricardo_NY1]

For me, I'd say anything in the 1-3"ish range is shallow. 4-5" I consider an average and fair depth 6-7" I consider deep. I've dug and found deeper, and I would label those F'ing deep.

 

[bazinga]

0"-4" - Clad... It gets left in the ground for future generations.
5"-7" - Average depth on most of my finds
8"-9" - Would consider these to be deep, but they still give off great signals and they come pretty frequently.
10"+ - Only dug a few wheats this deep before. Signals sounded great, but you really had to be moving slowly to hear these.

 

[RLOH]

I hunt for coins and occasionally find jewelery. I don't relic hunt. I program or adjust my detectors for coins so that is where "deep" falls into the mix for me. It seems that in the places I hunt, I have to have a detector that will find a coin that is 7 inches plus. Most of the older coins I find will come from at least 7 inches deep so that is the starting point for my meaning of deep. The deepest coin I ever found was a 1844 large cent from about 14 inches. I have not came close to that depth since. P.s. that was found with an Explorer. Almost everytime I hunt I find a coin from about 8 inches deep. R.L.

 

[Montana Jim]

Definition of deep: 1/2 inch further than I am willing to dig in any ground condition for any reason.

Used in a sentence: "Man, that thing must be really deep - screw it...."

 

[AZ-Mtnman]

LOL Nicely put, Jim.