What's new

Different coil for Equinox

Slimpickins

Full Member
Joined
Feb 16, 2014
Messages
226
Reaction score
259
Golden Thread
0
Detector(s) used
Equinox 800, Whites Dual Field PI
Primary Interest:
All Treasure Hunting
Would a 9” concentric coil work on an Equinox 700? I would think locating finds in the water would be easy peasy since the target is dead center under coil
 
Upvote 0
Would a 9” concentric coil work on an Equinox 700? I would think locating finds in the water would be easy peasy since the target is dead center under coil
I use the M9 coil for the Manticore and it works great at pinpointing better than the M11, isn't the M9 is what you have?
 
Manticore and Equinox don't share the same coils. The factory 6" coil for the Nox works just fine, just doesn't cover much ground. I like using the 11" coil in the water.
 
11 is bestest that works pretty well on equinox series.
 
Coiltek makes a 10x5 double D for the Equinox. Thats about the closest you will get to a 9inch. I used one for a while on my 800, it was ok but I liked the 6in. better.
 
Thanks. My Nox 800 flooded first time in the water. Got it replaced under warranty. Not going under water anymore. I may get a 700 for use in waist to neck deep water and was thinking an 8 or 9” concentric coil like what is on the CZ21 would be perfect. I used to have a DFX that I enjoyed. I also had a Whites PI unit that found several gold and 1 Tiffany Platinum 950 wedding band. The 12” coil floated like a cork. It was a total PITA trying to hunt in the water. I don’t understand why Fisher is asking over a thousand dollars for such old electronics
 

Users who are viewing this thread

Back
Top Bottom