What's new

equinox 800 , 1700's homestead. combating EMI

Wild Colonial Boy

Hero Member
Joined
Sep 7, 2013
Messages
612
Reaction score
880
Golden Thread
0
Location
the nearest ditch
Detector(s) used
equinox 800
Primary Interest:
All Treasure Hunting
Hello

I have been successful in locating a 1700's homestead but its right under power lines
haven't tried it yet,

Any tips settings for searching amongst the iron and combating EMI at the same time

most welcome
 
You're most likely going to just try a few things to see what sort of EMI you have. Some can be virtually eliminated by just doing a noise cancel. Some EMI can't be eliminated no matter what you do. Some things that can help....lower your sensitivity, change to a smaller coil, try different modes and recovery speeds, and as a last resort, go to a single frequency instead of multi.
 
You're most likely going to just try a few things to see what sort of EMI you have. Some can be virtually eliminated by just doing a noise cancel. Some EMI can't be eliminated no matter what you do. Some things that can help....lower your sensitivity, change to a smaller coil, try different modes and recovery speeds, and as a last resort, go to a single frequency instead of multi.
thank you, solid advice, ill keep you posted on any success
 

Users who are viewing this thread

Back
Top Bottom