63cagedfalcon
Full Member
- Joined
- Apr 3, 2019
- Messages
- 142
- Reaction score
- 371
- Golden Thread
- 0
- Location
- Bella Vista, AR
- Primary Interest:
- Other
- #1
Thread Owner
I was snooping around at one of my local second hand shops & spotted a Whites XLT E-series. Was told batteries wouldn't hold a charge. Not a scratch on the coil or main box. Carbon fiber shaft, extension, ni-cad & alkaline pack & charger, $90.
Put new batteries in & unit wouldn't turn on, opened it up & tested voltage, nothing. Moved contacts on board, presto 12+ volts. Turn it on again.....nothing. Noted orientation of ribbon cable & removed it to look a board closer, thought it was weird no orientation notches for cable, flipped it around & it came on.
Watched a old series on YouTube, went out into yard, found 2 pull rings, a broken key & a tire gauge body.
Really rocky in Northwest Arkansas, any suggestions on settings? Lots of 95+ hits, hot rocks?
Thanks Paul
Put new batteries in & unit wouldn't turn on, opened it up & tested voltage, nothing. Moved contacts on board, presto 12+ volts. Turn it on again.....nothing. Noted orientation of ribbon cable & removed it to look a board closer, thought it was weird no orientation notches for cable, flipped it around & it came on.
Watched a old series on YouTube, went out into yard, found 2 pull rings, a broken key & a tire gauge body.
Really rocky in Northwest Arkansas, any suggestions on settings? Lots of 95+ hits, hot rocks?
Thanks Paul
