Keppy
Gold Member
- Joined
- Nov 19, 2006
- Messages
- 8,390
- Reaction score
- 2,873
- Golden Thread
- 0
- Location
- N.E. Ohio on lake Erie
- Detector(s) used
- ** WHAT ONE I FEEL LIKE ON HUNTING DAY *****
- Primary Interest:
- Other
- #1
Thread Owner
My friend bought a Ace 250 off Craigs list used … he said he checked it out it worked good … he brought it home and the next day it would not turn on .. He put new batteries in it and he still has to push the on switch any were from 7 to 12 times before it will turn on…….At times it seems like it wants to turn on the display will look like it will come on but then nothing .. but when he turns it off it goes right off …. But after he gets it on it works fine….. Any idea's out there ? He said………. HELP
I would think it was just a dirty contact in the ON/OFF switch except that it reportedly goes OFF easily each time. How long is he waiting for it to come on after he pushes the ON switch? Maybe a loose coil wire connection to the unit, and it is slow coming on waiting for reading from the coil, then he is hitting the switch again turning it back off before it has had a chance to come on? Probably needs to go in for service, but I would undue the coil wire, clean the connections, and re-install it just to make sure.







