What's new

Garrett Pinpointer giving me troubles

perry2

Sr. Member
Joined
Jan 1, 2013
Messages
404
Reaction score
215
Golden Thread
0
Location
Bradford, NH
Detector(s) used
AT PRO
Primary Interest:
All Treasure Hunting
My Pinpointer (1 yr old) sometimes wont stop beeping ---I can set it down or wave it in the air and it keeps beeping --If I shut it off and back on it may or may not do it again ?????
Any ideas ?? Perry
 
metal_detector.gif
Take a look at Pro Pointer question... (Jun 01, 2013). BTW - if you search the Garrett SubForum - you will find a number of threads talking about the problem...
 
Mine does this periodically. I just turn it off and then back on and it usually clears the problem up.. Also a new battery will resolve the problem some of the time..
 
Mine went back twice for the exact same thing, they fixed it on the second try.
 
I had that problem after the first battery change. Then it was suggested that the replacement battery might not be the same size/length as the one it came with. Darned if it wasn't just a hint smaller. I resolved it by just folding up a piece of paper and fitting it into the cap to make up the difference in space until I could get a new battery.
 
Thanks : I'll try a bit of tissue in the cap ///
By the way thinking I may need to send it back I bought a CEN TECK hand held detector (pin Pointer) as a backup-$16.00 + S&H -SAVE your money-ITS JUNK ////// Perry
 

Users who are viewing this thread

Latest Discussions

Back
Top Bottom