Capt Nemo
Bronze Member
- Joined
- Apr 11, 2015
- Messages
- 1,058
- Reaction score
- 1,611
- Golden Thread
- 0
- Location
- Oshkosh, WI
- Primary Interest:
- All Treasure Hunting
Went back to Lake Superior again.
The spot where I dumped my tailings last time was washed away, and covered in 6-12" of bare cobble. I spent the rest of yesterday looking for some new spots. I tried the spot that a local told me about east of Deer Park. The road in was barely wider than the vehicle and made me wish I had 4WD, but was passible. The trailhead to the beach was a good 100' above the beach. Cobble was all over with not a hint of black sand. I walked about a half mile over what looked like the surface of Mars to an eroded area. Thin black sand was present in a lot of places, but not the thick slick I was told about. I checked another spot on the same beach that I had been mining, and found black sand where the lake had eroded the grassline. Working that would involve tearing up the grassline by undercutting. I'd also have to worry about things collapsing on me. There was OK parking there, but not for overnighting, as there was a NO CAMPING sign. So I decided to try hitting the cobble at the waterline of my old spot.
The way I left it, and the way I found it.


Several of the improvements to the Model 5 worked well. But the biggest problem was the grizzly dropping chunks that should have been rejected. The bed was locking up on the amount of pea gravel and larger material that the jets couldn't move. I filled 2 buckets and would have to cleanout due to bed lockup. 2 cleanouts is a 3.5 gal bucket. I then shut down and classified the cons to window screen and fed everything to the Model 7 bed for concentrating. That took everything down to a 14" panfull.
Here's what came out with window screen. (<3/4")

Here's the Model 7. (3"x12"x2.5")

Had a small agate show up on the grizzly!

May have bagged a flake or two, and another platinium flake, but it doesn't look like there's much 15" down into the cobble. Looks like it's time to give up on the header box and build a trommel.
It was a Mickey Mouse trip!

The spot where I dumped my tailings last time was washed away, and covered in 6-12" of bare cobble. I spent the rest of yesterday looking for some new spots. I tried the spot that a local told me about east of Deer Park. The road in was barely wider than the vehicle and made me wish I had 4WD, but was passible. The trailhead to the beach was a good 100' above the beach. Cobble was all over with not a hint of black sand. I walked about a half mile over what looked like the surface of Mars to an eroded area. Thin black sand was present in a lot of places, but not the thick slick I was told about. I checked another spot on the same beach that I had been mining, and found black sand where the lake had eroded the grassline. Working that would involve tearing up the grassline by undercutting. I'd also have to worry about things collapsing on me. There was OK parking there, but not for overnighting, as there was a NO CAMPING sign. So I decided to try hitting the cobble at the waterline of my old spot.
The way I left it, and the way I found it.


Several of the improvements to the Model 5 worked well. But the biggest problem was the grizzly dropping chunks that should have been rejected. The bed was locking up on the amount of pea gravel and larger material that the jets couldn't move. I filled 2 buckets and would have to cleanout due to bed lockup. 2 cleanouts is a 3.5 gal bucket. I then shut down and classified the cons to window screen and fed everything to the Model 7 bed for concentrating. That took everything down to a 14" panfull.
Here's what came out with window screen. (<3/4")

Here's the Model 7. (3"x12"x2.5")

Had a small agate show up on the grizzly!

May have bagged a flake or two, and another platinium flake, but it doesn't look like there's much 15" down into the cobble. Looks like it's time to give up on the header box and build a trommel.
It was a Mickey Mouse trip!

Amazon Forum Fav 👍
Upvote
0