What's new

Handle comes loose on Stealth Scoop 920

adamBomb

Hero Member
Joined
May 30, 2014
Messages
650
Reaction score
553
Golden Thread
0
Location
Wilmington NC
Detector(s) used
Nox 700;
Past: Nox 600; CTX; CZ21; Excal II; White's DF;
920i Stealth Scoop
Primary Interest:
Beach & Shallow Water Hunting
I have the 920 stealth scoop and for some reason every 5-7 hunts or so the handle starts to slide out of the scoop. It happens slowly and if I don't re-tighten it the handle eventually just slides out. Any reasons why this is happening? I have the wood handle if that makes a difference. I was thinking of putting some grip tape on it before tightening to see if that helps but idk I figured I would ask if others have that problem first and what they did to solve it.
 
Upvote 0
Can you not use a ss washer and screw on the end of the handle similar to the way the carbon fiber shaft is set up?
 
Drill a small hole with a steel bit and secure with a screw. Just like the stavr keeps the handle I place. The clamp squeezes the wood and then over time slips out. One screw and viola
 

Users who are viewing this thread

Back
Top Bottom