mtntrekr2
Sr. Member
- Joined
- Jul 15, 2007
- Messages
- 359
- Reaction score
- 13
- Golden Thread
- 0
- Location
- berks county, pa.
- Detector(s) used
- Excalibur II 1000, Xterra-70 x3, Garret ace 250,
I found this today. At first I thought it was just a piece of scrap iron til I washed it and saw the key hole.
From what it looks like the key was not flat but more zig-zag when looking at the end.
The shank hole on the cleaner end seems to be more flat not round like most locks.
Size is about 2" across the top and 1 1/2" up either side. The lock is about 3/8" thick.
Thank you for any help
Joe
From what it looks like the key was not flat but more zig-zag when looking at the end.
The shank hole on the cleaner end seems to be more flat not round like most locks.
Size is about 2" across the top and 1 1/2" up either side. The lock is about 3/8" thick.
Thank you for any help
Joe
Attachments
Last edited:
