June 1st a little silver and a weird dime (pic)

[Bigheed]

picked up some dimes yesterday and even tried a box of quarters since they were low on dimes and I dont have any halves coming until this afternoon.

Box 1: (250) - 1 x 64 rosie
Box 2: (500) - 1 x 62 rosie - see attached pic is this an error or some kind of jewelry weld?
Box 3: (500) - Skunked
100 in factory rolled halves - Skunked
$10 in loose halves - 1 x 64
$32 in Ike dollars = skunked
Box of quarters - Skunked (goes without saying )
A couple more for the pile I guess!

Ok heres the picture of the dime, is this an error or a jewelry weld of some kind? its in the center of the coin on the back basically the torch is extended all the way down to the edge.
HH,
Bigheed

 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!

[Noahgman97]

That's very weird. Iv'e never heard of any error on a dime like that. It does look like it was welded though because on the edges of the mark it sorta looks burned or something. I'm no professianal welder, thats just my guess.

 

[kb4iqm]

Looks like it may have been silver-soldered. A jewelers silver weld would be a lot cleaner, and there would not be visible traces of flux left on the coin like that seen in that pic.

Bob

 

[CHAINCHOMP]

awesome finds!!! congrats! keep it up and hh! [R.I.P. Rich Hartford]