✅ SOLVED Just looking for info

Midden-marauder

Sr. Member
Joined
Dec 10, 2023
Messages
377
Reaction score
649
Golden Thread
0
So I found this out in the yard, it appears to be a brass drawer pull, vintage style but I think it's modern. I've been searching to try to find its match online but thus far I'm not finding much. The stamp on the back reads: EHMCO 2010. The 2010 part I'm assuming is the manufacturing year but I could be off here. Anyone care to take a shot at this one? I'm stumped at the moment....
 

Attachments

  • IMG_20240612_211001688.webp
    IMG_20240612_211001688.webp
    895.7 KB · Views: 49
  • IMG_20240612_210902818.webp
    IMG_20240612_210902818.webp
    1.2 MB · Views: 37
Hi Midden-marauder,
Not sure how wide this is...I think it may be a Boot Scraper which can be 6 inches wide?

Boot Scraper 2.webp
Boot Scraper.webp
 

Upvote 0
So I found this out in the yard, it appears to be a brass drawer pull, vintage style but I think it's modern. I've been searching to try to find its match online but thus far I'm not finding much. The stamp on the back reads: EHMCO 2010. The 2010 part I'm assuming is the manufacturing year but I could be off here. Anyone care to take a shot at this one? I'm stumped at the moment....


It is indeed a drawer pull, but I believe it's vintage rather than modern. Can't find a thing about the E.H.M. company, but there was a listing on ebay that matches yours:

 

As an eBay Associate we earn from qualifying purchases.
Upvote 2
It is indeed a drawer pull, but I believe it's vintage rather than modern. Can't find a thing about the E.H.M. company, but there was a listing on ebay that matches yours:

Excellent, that's actually rather helpful to see that. The date of 2010 was called into question by a couple things, one was another listing I found bearing a similar stamp with an apparently arbitrary number following. The other had to do with timeline, there were some inconsistencies about the 2010 thing especially after my girlfriend told me that this looks like the same drawer pulls that were mounted on her grandparents dresser, that would put it at least as far back as the mid 19th like basically everything else her grandsires left behind for me to find. I was able to pin down the likely manufacturer as being a machine shop in Warminster PA though that could also be wrong, it looked like a plausible candidate. Ok, well this one will go in the special collections box for items found on the property, I keep finding the ghosts around here, they live in a big music box I picked up.
 

As an eBay Associate we earn from qualifying purchases.
Upvote 1

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom