dwmedic
Jr. Member
- Joined
- Oct 6, 2007
- Messages
- 27
- Reaction score
- 0
- Golden Thread
- 0
- Location
- Oxford, ks
- Detector(s) used
- White's MXT, Fisher 1266X
- #1
Thread Owner
Just purchased a used cortes, my first T.I.D. machine, my question is that when I turn the detector on I get the initial tone that it is on then instead of it reading that it is in disc or all metal the screen reads to lift the coil then it reads iron or foil, now it does this whether the coil is pointed towards the ground or up in the air, whether I am inside or outside after about 10-20 sec it will read disc on the screen but as soon as I move it slightly it starts to read like I past an object again, seems like every time I bump it or move it slightly the display changes, also I know that manual ground balance does not work in disc mode but moving the dial while in disc causes the readings to go crazy, is this all something that is normal and I don't have it tuned right or should I have it sent in to Tesoro. Any and all help welcome thanks dwmedic