lorraine
Silver Member
- Joined
- Dec 15, 2010
- Messages
- 4,470
- Reaction score
- 3,764
- Golden Thread
- 0
- Detector(s) used
- Minelab GT; Sov Elite
- Primary Interest:
- Beach & Shallow Water Hunting
- #1
Thread Owner
My car with ( GT and Elite units/coils ) was unfortunately left outside for 2 days in heat of 80-83*
A few days later, when I went detecting at a beach, immediately after turning on the GT, the threshold began "beeping", "choking", erratically "buzzing" etc.
I changed the GT coil to the Elite unit : same problem
I changed the Elite coil to the GT unit : same problem
I changed batteries: same problem
A small hairline split was found on one of the coils; it was sealed off, but problem remains for both coils
The only reason I can think of is the heat affecting the coils
I would appreciate any comments, advice as to how heat may affect coils/units
Thank you,
Lorraine
A few days later, when I went detecting at a beach, immediately after turning on the GT, the threshold began "beeping", "choking", erratically "buzzing" etc.
I changed the GT coil to the Elite unit : same problem
I changed the Elite coil to the GT unit : same problem
I changed batteries: same problem
A small hairline split was found on one of the coils; it was sealed off, but problem remains for both coils
The only reason I can think of is the heat affecting the coils
I would appreciate any comments, advice as to how heat may affect coils/units
Thank you,
Lorraine