Random BEEP post follow up

[perry2]

Today I started out with the same beeping at the end of stroke as posted below . tried everything
as posted--no change. Then on a whim I changed out my batteries which were about 1/2 used.
ALMOST all the falsing STOPPED --lesson learned/// Perry

 

Amazon Forum Fav 👍

Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!

[patiodadio]

Thanks, I got a lot of false signals today and my batteries are down to 2 bars. I will replace them tomorrow.

 

[xr7ator]

That's odd. I have about 4000 hours on my at pro and I run the batteries down to one bar every time and many times until they are completely dead.

 

[MackDog]

That's odd. I have about 4000 hours on my at pro and I run the batteries down to one bar every time and many times until they are completely dead.

Once I get down to 2 bars I get ready to change out the batteries. Once you put a new set in you can really tell the improvement

 

[perry2]

I brought the battery stick in and just tested it -Just over dead line// they showed about 1/2 gone in the ATP Perry
somewhere I have a tester that shows voltage ?? I'll see if I can find it// Perry