Scubasalvor

[Shaw]

Can you share with me where you located the manifold and your hose for this setup? I found these hoses and will probably go that route if I cannot get anything cheaper.http://www.akmining.com/cart/hookah_diving_systems.htm

Thanks for the info.

 

Amazon Forum Fav 👍

Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!

[Salvor6]

Hello Shaw, I work in a machine shop and I made the manifold from a chunk of aluminum. You can make your own with a drill gun. If you need one, let me know and I will send you one. The hose came from Harbor Freight. You can get the hose fitting that goes on your reg from your local dive shop.

 

[Shaw]

Hello Shaw, I work in a machine shop and I made the manifold from a chunk of aluminum. You can make your own with a drill gun. If you need one, let me know and I will send you one. The hose came from Harbor Freight. You can get the hose fitting that goes on your reg from your local dive shop.

Thanks for the info sub,

Shoot me a price of what it would cost you and I will send you some mula, If possible could I just get a double attachment instead of the four? My buddy that works in a machine shot has taken 4 years to cut some stainless and make some bends - I have lost faith in him on that aspect!

Thanks again and just message me with a cost.

Are those lines from Harbor working OK? Do they have any taste or contaminants in the lines? I have seen both sides of the argument on here.

 

[Shaw]

I will only be at around 10' but I need some length because my gear will be on the shore line and not a boat.

Is this it? 3/8" 50'

 

[Salvor6]

Yes, thats the hose and yes, it does have a plastic smell to it. But you can't notice it when breathing through your mouth. I have 50' and it seems to be long enough.

 

[Shaw]

Done, Thanks again for the info and It was good talkin to ya.

Jason

 

[diverj]

Jason, you could install a apollo bio filter inline . It has a charcoal filter to clean up what your breathin.
Jeff

 

[Salvor6]

Hey Jason,
got your check today. Thanks. I am sending your hookah kit out tomorrow morning. I have 6 more kits if anybody else is interested. PM me. They are $35 plus $5 for shipping.

 

[Shaw]

I was actually headed to get my tank filled tomorrow it just so happens. Thanks again and I will post pictures of the rig.

Looking forward

 

[Shaw]

Transaction Complete and here is what I got complete with instructions.

Thanks again Peter and I look forward to using it here real soon. The quality of the piece looks great and sturdy, I am 100% satisfied with what I got from you.

Jason

 

[Salvor6]

Hey thanks Jason. I aim to please. Show us a pic of your rig when you have it all hooked up. What kind of reg are you using?

 

[Shaw]

No problem, I am waiting to find a cheaper reg than my main rig. Even an octo if I can find one. Like I said before I will never get deeper than 15' so no worries about decompression and if it fails I come up.

I have been checking craigslist but need to hit up the shop.

 

[Shaw]

Got my hose in today, Actually looks like a good quality hose. Cant wait to get it all together.

 

[abacopirate]

Hi Guys. I use this type of hose from my compressor to fill lift bags and run air tools underwater but never for breathing air. Breathing air hose should asways be food grade or for breathing air. Rubber smell means there is something giveing off that smell, and also as the hose sits in the sun and heats up it gives off PCB. So use it if you want but how much is your health worth in the long run.