TID or Conductivity Chart for a Explorer XS?

[Silver Slayer]

TID or Conductivity Chart for a Explorer XS?

Does any one have a TID or Conductivity Chart for a Explorer XS that you can post. Thanks in advance

 

[bazinga]

Re: TID or Conductivity Chart for a Explorer XS?

You shouldn't need it at all. Dig deep upper right and upper middle and anything deep that hits as a high tone. And then bottom center of your screen will be nickels.

Listen for high tones that are 4" or deeper for the most part. And open your screen wide open with iron mask. Don't use any silly programs. Fast on, deep off, gain 10. And play with the other settings depending on how you like to listen to things.

There, you just learned how to use an Explorer.

TIDs are for White's users.

 

[Silver Slayer]

Re: TID or Conductivity Chart for a Explorer XS?

Thanks Bazinga for the great info!

 

[relic lover]

Re: TID or Conductivity Chart for a Explorer XS?

You shouldn't need it at all. Dig deep upper right and upper middle and anything deep that hits as a high tone. And then bottom center of your screen will be nickels.

Listen for high tones that are 4" or deeper for the most part. And open your screen wide open with iron mask. Don't use any silly programs. Fast on, deep off, gain 10. And play with the other settings depending on how you like to listen to things.

There, you just learned how to use an Explorer.

TIDs are for White's users.

Yep that's how I run mine

 

[onemanwolfpack]

Re: TID or Conductivity Chart for a Explorer XS?

Thanks for the info. I have just upgraded from a Bounty Hunter to a Minelab XS.

How do you run this way in a lot full of aluminum pieces? Is there a way to discriminate out aluminum without losing coins, or does it just take time to learn what the MD is telling you? Also I've noticed pull tabs and gold rings have the same tone. Any way to discriminate out pulltabs without missing jewelry?