What's new

Unidentified Floor Object🤣

TheCaribbeanDigger

Hero Member
Joined
Aug 15, 2013
Messages
600
Reaction score
753
Golden Thread
0
Location
Puerto Rico
Detector(s) used
Minelab Equinox 800, Fisher F75, Garrett AT Pro, Fisher F2
Primary Interest:
All Treasure Hunting
Howdy folks. I was investigating on the side of a hill that has a very old house that was built in the mid 1700’s. I still haven’t contacted the owner for permission but on the side is public land and you can see old pottery, bricks, glass and all the good signs of an awesome spot for metal detecting. So I just gave a quick swing and the very first signal out pops this lead object. Solid and very heavy. Can someone please explain or say whta could this be? Ive never seen anything like it.
 

Attachments

  • IMG_0550.webp
    IMG_0550.webp
    866.2 KB · Views: 90
  • IMG_0553.webp
    IMG_0553.webp
    485 KB · Views: 50
  • IMG_0552.webp
    IMG_0552.webp
    520.2 KB · Views: 50
  • IMG_0551.webp
    IMG_0551.webp
    469.9 KB · Views: 52
Upvote 5
Another thought is a master foundry mold.
This would be used to be pressed into damp sand, to make a pattern.Then the molten iron, brass would be poured in.
 
Another thought is a master foundry mold.
This would be used to be pressed into damp sand, to make a pattern.Then the molten iron, brass would be poured in.
That is a reasonable guess. Something that is easily melted down and reused for another job. However, what would it be if it was casted out of iron?
 
Interesting !
 
That is a reasonable guess. Something that is easily melted down and reused for another job. However, what would it be if it was casted out of iron?

Foundry workers would press this lead pattern directly into packed casting sand to create the hollow cavity template needed to later pour molten iron.

To answer your question: The final product.
 
Kind of small, but, maybe a gate weight?
 
Foundry workers would press this lead pattern directly into packed casting sand to create the hollow cavity template needed to later pour molten iron.

To answer your question: The final product.
Maybe I wasn’t clear. What would the purpose of the final product be given your theory?
 
Definitely has the look of a spindle whorl. They were made from all types of materials. My daughter found a stone one in Portugal at a Roman site. Lead would make sense for colonial America I would say.
 

Users who are viewing this thread

Latest Discussions

Back
Top Bottom