250hondacr
Jr. Member
Got my etrac wet on accident took it apart to dry anything else I should do before I try to turn it on? I'm sick over it.
wet etrac
- Thread starter 250hondacr
- Start date
IAsoldier
Hero Member
- Apr 8, 2008
- 941
- 218
- Detector(s) used
- Minelab Equinox 600 with 11 inch coil. BLuetooth head set and Minelab pin pointer. My back is the Minelab Explorer II w/ 12 x 9 NEL coil, Minelab pinpointer and Deep woods headphones.
- Primary Interest:
- All Treasure Hunting
You should be fine I got mine wet before and the next day it was ok
Jason in Enid
Gold Member
- Oct 10, 2009
- 9,593
- 9,229
- Primary Interest:
- All Treasure Hunting
Depends, was it on when it got wet? salt or fresh water? Did you immediately pull the battery? Those answers will give you your chance of recovery.
The best thing you can do (at this point) is make sure the battery is out. If you dunked it in salt water, FLUSH IT WITH FRESH WATER!. If you dunked it in fresh water, then just give it lots of time to dry. If you can pack it in a container with dry rice and seal it for about a week would be great to sucking the last of the moisture out. After that, put in a fresh battery and hope for the best.
The best thing you can do (at this point) is make sure the battery is out. If you dunked it in salt water, FLUSH IT WITH FRESH WATER!. If you dunked it in fresh water, then just give it lots of time to dry. If you can pack it in a container with dry rice and seal it for about a week would be great to sucking the last of the moisture out. After that, put in a fresh battery and hope for the best.
OP
OP
250hondacr
Jr. Member
- Thread starter
- #4
Fresh water its in some rice as we speak I was going to try it tonight maybe I'll wait a while thanks for the info.
- Jul 27, 2006
- 48,654
- 55,403
- Detector(s) used
- Minelab_Equinox_ 800 Minelab_CTX-3030 Minelab_Excal_1000 Minelab_Sovereign_GT Minelab_Safari Minelab_ETrac Whites_Beach_Hunter_ID Fisher_1235_X
- Primary Interest:
- All Treasure Hunting
If you have a hair dryer with cold setting no heat use that remember there are 2 sides to motherboard. Be sure it is completely dry before turning it on...
Sent from my Galaxy Nexus using Tapatalk 2
Sent from my Galaxy Nexus using Tapatalk 2
OP
OP
250hondacr
Jr. Member
- Thread starter
- #6
It came on working so far.
Jason in Enid
Gold Member
- Oct 10, 2009
- 9,593
- 9,229
- Primary Interest:
- All Treasure Hunting
Great to hear! Hopefully you dodged a bullet on this one.
OP
OP
250hondacr
Jr. Member
- Thread starter
- #8
No kidding gotta be more careful
christo000
Silver Member
- Mar 17, 2013
- 3,765
- 812
- Detector(s) used
- Xp Deus,m-6 pinpointer, technetics t2ltd (had, whites v3i,minelab xterra 705,atpro,prism 4,sunray probe minlabe profind,garret propointer, f75ltd and many more)
- Primary Interest:
- All Treasure Hunting
I'm not an e-Trac user but glad to hear to u dodged that bullet & ur detector is still working
Top Member Reactions
-
1894 -
1042 -
974 -
972 -
871 -
828 -
767 -
748 -
698 -
585 -
366 -
366 -
350 -
345 -
341 -
335 -
E
325
-
317 -
307 -
278
