What are some of the last all-analog circuitry metal detectors on the market?

P

Punchy71

Jr. Member
May 29, 2013
21
9
Primary Interest:
All Treasure Hunting
Upvote 0
I don't know if it is the last one, but, one of the best analogs is the Whites 6000 DiPro.
 

I don't know either, but my very first detector was a Radio Shack special! LOL!
 

The Whites detectors in the big blue metal boxes are a sure sign of being analog tuned.

coinmaster.jpg
 

The Fisher CZ3D and Gemini 2-box detectors are still being built, also a couple of utility units.
Tesoro Bandido II uMax was one of their best (and last) all-analog detectors.
The White's XL-Pro was the last of the all-analog "6000" series and is widely regarded as one of the best all-analog detectors ever.
 

Words of Wisdom?

If you can find one a Garrett Master Hunter VLF/TR or a Master Hunter A.D.S. Have used one for years and yes even though they were made in the 1970's and 1980's. These old dogs will keep up and sometimes outperform the new digital machines. Yes they are old, heavy, eat batteries but they tell you in the VLF mode if you have a deep coin by the sound of the signal. Yes you will dig some junk mostly rusty nails. You will learn and become a better metal detector operator.

I have both a digital and analog detectors. Both have there place. I if going after old deep coins in a hunted down old school or park I bring the analog. If it's trashy like a fair grounds or some of the ball parks and soccer fields I hunt I grab my digital with it notch discrimination filters. Both will find deep coins it's that the analog machine I get to do most of the discrimination in my mind which is still a very fast computer even at my age. You still have to have the coil over the target to find it whatever IT is. I do trust my mind and years of experience in recovering deep OLD COINS. Over a machine that needs to be hooked up to a computer to even start detecting. Yes I am a old geezer I have hunted and observed from some of the best that were/are. No brag just fact. Just telling you if you learn to operate analog you will get the deeper coins that others have left behind.

All the best my friends,

Senior Deacon
 

The fisher CZ3D is tuned to find deeper old coins. I guess thats why they're still being produced.
 

cudamark said:
I don't know if it is the last one, but, one of the best analogs is the Whites 6000 DiPro.
Click to expand...

As long as it was the old blue box version. When they changed it to the black box it went to digital (and the box shrunk by half).
 

Escape said:
The fisher CZ3D is tuned to find deeper old coins. I guess thats why they're still being produced.
Click to expand...


Those aren't what the OP is asking about. he is asking about TRUE, ORIGINAL MEANING of the word "analog" The CZ3D uses computerized, digital signal processing. Using knobs and a pointer display is not really analog. Somewhere people *******ized the term and began using to mean "knobs" instead of buttons and digital displays.

The only true analog detector I ever owned was my Garrett MH. It sucked on depth, but its audio was nothing shy of amazing. I heard so many old timers talk about "the sound of silver" so I sat with my old MH passing clad and silver dimes back and forth for hours. Finally, I was able to tell the difference in the sound with about 90% accuracy. After I upgraded, I could never find a detector that could do that. Don't get me wrong, I wouldn't trade my CTX for a truck load of MHs but I do still miss that ability to tell just by sound.
 

Jason in Enid said:
As long as it was the old blue box version. When they changed it to the black box it went to digital (and the box shrunk by half).
Click to expand...

Nope, the Pro-XL and the XL-Pro were all-analog. The shrink was from going to SMT.

Jason in Enid said:
The CZ3D uses computerized, digital signal processing.
Click to expand...

Nope, CZ3D is all-analog. No micro.
 

Last edited:
carl-nc------"Nope, CZ3D is all-analog. No micro.””
Does that mean that the circuit board contains no integrated circuits? Its all done using discreet components like the early detectors?
 

My Minelab Musketeer Advantage holds it's own on relics with most competitors.

Sure loves aluminum and foil, though.
 

Escape said:
carl-nc------"Nope, CZ3D is all-analog. No micro.””
Does that mean that the circuit board contains no integrated circuits? Its all done using discreet components like the early detectors?
Click to expand...

Sure, it has lots of ICs.
 

Question: Does a digital circuit have to be powered on for an EMP to destroy it?
 

I have an old White's will sell for $1000. LOL
 

signal_line said:
Question: Does a digital circuit have to be powered on for an EMP to destroy it?
Click to expand...

Depends on how well it is shielded. If you are really concerned keep the detector in a metal box.
 

Is that what White's did with their entire detector lineup? When they went from a large blue box to a smaller black box on all their models, they changed from all-analog to all-digital internal circuitry?
 

Punchy71 said:
Is that what White's did with their entire detector lineup? When they went from a large blue box to a smaller black box on all their models, they changed from all-analog to all-digital internal circuitry?
Click to expand...

As I said in my earlier post, the move from big-blue to small-black was due to the switch from thru-hole to surface mount. Some of the small-black models were still all-analog, including the XL-Pro.
 

I thought the, still being made, Gold Bug 2 was analog.
Marvin
 

You must log in or register to reply here.

Garrett 2500 Pro

⬅️ Previous Thread

Teknetics Liberator Metal Detector

Next Thread ➡️

Top Member Reactions

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Latest Discussions

Back
Top