Whats best depth settings XP-Deus

DetectorMoe

Hero Member
Joined
Apr 4, 2013
Messages
905
Reaction score
4,404
Golden Thread
1
Location
SouthEast North Carolina
🥇 Banner finds
1
🏆 Honorable Mentions:
1
Detector(s) used
XP Deus, Equinox800, ATpro
Primary Interest:
All Treasure Hunting
What program and settings to use for those deepest targets to find with XP-Deus? I only have the stock 11 inch coil, under 4.1V. Most of the time my spots are sandy, easy digging..

I been told I should try these settings?

Try using deus fast. Up the sensitivity to 95, run frequency at 4 or 8 khz. Turn audio response to a minimum of 5, have reactivity at 1 and silencer -1. Use discrimination of 15 or below.
This should get you pretty deep but will be chatty.
 

Last edited:
I am giving lessons in your area for a small fee... lol Just kidding! You need to come buy this X35 nine inch coil from me.
 

If the coil was any good why would you SELL IT ???????
 

I have the HF 9 inch coil and I dont need another 9 inch coil..
 

So are u selling this
 

I use the Deus Fast, maybe the "deep" program may be deeper, but I just stick to the one I know. Sweep speed is important, probably more than which program. Also, that coil almost needs to brush the ground, or you automatically lose a few inches. I recently got a 17th century small buckle at 10" in iron and aluminum infested ground with the Deus Fast program. Under those conditions, the deep program would probably be useless. And don't lift up the machine at the end of a swing!
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom