WHY is my machine blaring while pinpointing?

[can]

On the beach in NC today. First day ever. Put in beach mode. When I thought I hit a target and went to pinpoint it would really go off for a very large area. Is this what you call the halo effect? Or do I need to do more with my settings. The sand was tight damp, but not wave washed. Any suggestions. Thanks

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[Tedyoh]

Did you dig? If so what was it?

Deus is not the best for salt beaches, but it will work, I used my once in salt, in NC actually, it would false anytime the coil bumped the sand or water. I think I had to lower the GB to around 12 and make sure it's set to "wet sand". I never use the pinpoint, just wiggle it about an inch each way, works better.

 

[can]

Did you dig? If so what was it?

Deus is not the best for salt beaches, but it will work, I used my once in salt, in NC actually, it would false anytime the coil bumped the sand or water. I think I had to lower the GB to around 12 and make sure it's set to "wet sand". I never use the pinpoint, just wiggle it about an inch each way, works better.

Thanks for the reply. I did find a few coins. but that pinpointer was totally out of control

 

[jeff of pa]

I don't know on the Deus but,
If I'm understanding what your saying, My Explorer will do that occasionally.

only remedy is go out of Pinpoint hold coil in the air then go back into pinpoint.

May be worth a try next time

 

[Tedyoh]

Thanks for the reply. I did find a few coins. but that pinpointer was totally out of control

Not sure why it would be? Maybe there was a pirates chest 3 foot down?.....same here, few coins and 1 junk ring, i stayed in the wet sand, on the bone dry sand you can use any program.

 

[can]

I don't know on the Deus but,
If I'm understanding what your saying, My Explorer will do that occasionally.

only remedy is go out of Pinpoint hold coil in the air then go back into pinpoint.

May be worth a try next time

Thanks I will give it a shot next time out.

 

[can]

Not sure why it would be? Maybe there was a pirates chest 3 foot down?.....same here, few coins and 1 junk ring, i stayed in the wet sand, on the bone dry sand you can use any program.

I wish. The machine was doing it just about everytime I had a hit.

 

[Maine_Capt]

Hi Can...do you know that you can reduce / reset the sensitivity of the pinpointer by depressing its button multiple times? Not sure what your problem really is but thought I'd put that out there.

 

[jeff of pa]

Hi Jeff do you know that you can reduce / reset the sensitivity of the pinpointer by depressing its button multiple times? Not sure what your problem really is but thought I'd put that out there.

I'm not talking of the Pinointer.
I'm talking of the Explorers Pinpoint Mode.
If I hold the Coil over the detected Target, Or beside it & hit pinpoint
most of the Times My headphones Blare like the target is the size of a Car & Not Overloading .

IF I hold the coil up , hit poinpoint then Lower it, It usually is fine.

I believe CAN Is talking about his Deus doing the same

 

[Maine_Capt]

If you are referring to your XP Deus pinpoint mode, press the Pinpoint mode button a second time to reduce its sensitivity and the blaring will stop.

 

[Maine_Capt]

I'm not talking of the Pinointer.
I'm talking of the Explorers Pinpoint Mode.
If I hold the Coil over the detected Target, Or beside it & hit pinpoint
most of the Times My headphones Blare like the target is the size of a Car & Not Overloading .

IF I hold the coil up , hit poinpoint then Lower it, It usually is fine.

I believe CAN Is talking about his Deus doing the same

Ooops. Sorry Jeff got your's and Can's posts mixed up there.

HH

 

[can]

Hi Can...do you know that you can reduce / reset the sensitivity of the pinpointer by depressing its button multiple times? Not sure what your problem really is but thought I'd put that out there.

Thanks for the help. I tried that while I was out but it didnot make any difference

 

[can]

I'm not talking of the Pinointer.
I'm talking of the Explorers Pinpoint Mode.
If I hold the Coil over the detected Target, Or beside it & hit pinpoint
most of the Times My headphones Blare like the target is the size of a Car & Not Overloading .

IF I hold the coil up , hit poinpoint then Lower it, It usually is fine.

I believe CAN Is talking about his Deus doing the same

I will try that next time Im out. Thanks for the suggestion