X-Terra 305 Beach Settings

Trackerman

Hero Member
Jan 23, 2009
713
82
Detector(s) used
Whites Dual Field Pi/Whites Dfx/ Garrett At Pro/Garrett Ace 250/ Whites M6/ Detector Pro Pirate /Tesoro Sand Shark/
Bounty Hunter Tracker IV/ Bounty Hunter Tracker II
Primary Interest:
All Treasure Hunting
Havnt tried beach but i would ground balance in all metal. Crank sensitivity up to a decent level as high as you can without falsing. and set the machine to 3 tones and run it in mode 1 . Also if possible take some coins and test them on the sand and also take a small gold item to test it dig a hole and see numeric. Good luck
 

OP
OP
CrazyBones

CrazyBones

Greenie
May 7, 2009
18
0
Oregon
Detector(s) used
Minelab X-Terra 305
Thank you for the info!

I ran in on Sensitivity at 5 and the threshhold at 17. Came up with some clad and a Quick Silver pin.
 

Top Member Reactions

Users who are viewing this thread

Top