Cleaning a ring with electrolosis........

[Mike from MI]

I thought some members would like to see the use of electrolosis in action to clean a silver ring.
I found a small sterling ring yesterday morning in a lake. It is an antique kids birthstone ring.
I have found several of these same rings with different colored stones over the years.
When silver is lost in the water it turns black. If it has been there a long time it develops a black crust like this one.
Below you will see the before, during, and after affects of using the electrolosis. I plan to put together a video or do a live talk at our detecting club meeting next month on the subject.

 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!

[RFrady]

Very nicely done. Nice ring also.

 

[mighty_mace]

Looks great, a video would be stellar. Would love to learn the process.......

 

[MICHIGANJAY]

Thanks for the great post!!! I just made an "electrolosis machine" a week or two ago and I am still impressed by what a little energy can do to help restore relics. I think encrusted lake finds like that deserve electrolosis to help clean em' up. MJ

 

[bdavis7640]

I find a lot of crusty silver rings in the lake I hunt, I have been using tarnex then silver polish but its a slow process and it doesen't get in the smaller detailed areas. I am very interested in how you are doing this. The results are impressive

 

[rob.s]

 

[olekyground]

Awesome! I would love to see that video!

 

[curbdiggercarl57]

Great job on the cleaning, if I'd done it, it would have looked like a crayon in a microwave.
Kudos.
Carl

 

[eckstar]

I LOVE using electrolysis to clean up my finds. Only trouble is, some of the stuff I clean is so big, I have to do it in a 55 gallon fish tank in my bathroom, lol. For those who want to know how it's done, here's a link: http://www.rickswoodshopcreations.com/Miscellaneous/Rust_Removal.htm

 

[Dwight S]

I find a lot of crusty silver rings in the lake I hunt, I have been using tarnex then silver polish but its a slow process and it doesen't get in the smaller detailed areas. I am very interested in how you are doing this. The results are impressive

Check in the How To forum. Quick & easy.... Take a Gladware container, an old AC/DC transformer/charger for a phone or other rechargable device; one you can see the two wire outer sleeve. Cut the end off, strip back to 1/2" of bare wire and clamp on aligator clips on each of the two wires. Put water, lemon juice and salt in the container. Clamp the ring with one end of the charger drop it in water, clamp a sacrificial metal (old steel spoon, bottle opener) and drop it in water. DO NOT LET THEM TOUCH. Plug in charger. If the ring starts bubbling, you have it correct. If the sacrificial metal bubbles, switch the wires around. Let it work for three to five minutes and check. Be sure to unplug the charger before you touch anything...

 

[Silver Searcher]

I use one for Silver to but I abandoned the Alligator Clip because it scratches Silver

SS

 

[Tigger]

Are there any gemstones you can't do this with, (I'm guessing not pearl or opal?) It sure made a great difference!!

 

[Mike from MI]

Are there any gemstones you can't do this with, (I'm guessing not pearl or opal?) It sure made a great difference!!

Not sure? I do know that the cheap kids rings that have the stones glued it will often fallout if they are there at all. Most of the time they have already fallen out from the acid in the lake.

 

[cyberborikua]

I thought some members would like to see the use of electrolosis in action to clean a silver ring.
I found a small sterling ring yesterday morning in a lake. It is an antique kids birthstone ring.
I have found several of these same rings with different colored stones over the years.
When silver is lost in the water it turns black. If it has been there a long time it develops a black crust like this one.
Below you will see the before, during, and after affects of using the electrolosis. I plan to put together a video or do a live talk at our detecting club meeting next month on the subject.

Nice job. May I interject an additional, yet optional step? After I clean silver with electrolysis, I rub the piece with a baking soda paste and it will sparkle as if it was brand new!

 

[Mike from MI]

I thought some members would like to see the use of electrolosis in action to clean a silver ring.
I found a small sterling ring yesterday morning in a lake. It is an antique kids birthstone ring.
I have found several of these same rings with different colored stones over the years.
When silver is lost in the water it turns black. If it has been there a long time it develops a black crust like this one.
Below you will see the before, during, and after affects of using the electrolosis. I plan to put together a video or do a live talk at our detecting club meeting next month on the subject.

Certainly does! I use it too!

Nice job. May I interject an additional, yet optional step? After I clean silver with electrolysis, I rub the piece with a baking soda paste and it will sparkle as if it was brand new!

 

[eckstar]

I use one for Silver to but I abandoned the Alligator Clip because it scratches Silver

SS

Yeah, I either wrap the wire end directly around the item, or for small items I use a paper clip

 

[West Jersey Detecting]

Here is a great post of an Electrolysis machine made with a plastic Folgers coffee can.

http://forum.treasurenet.com/index.php/topic,10898.0.html