What's new

19/20?

IronSpike

Silver Member
Joined
Feb 24, 2009
Messages
3,142
Reaction score
61
Golden Thread
0
Location
NC
Detector(s) used
Whites XLT
Primary Interest:
All Treasure Hunting
Any thoughts on this one?
 

Attachments

  • Picture 230.webp
    Picture 230.webp
    18.7 KB · Views: 500
  • Picture 232.webp
    Picture 232.webp
    18 KB · Views: 500
  • Picture 233.webp
    Picture 233.webp
    20.9 KB · Views: 501
  • Picture 234.webp
    Picture 234.webp
    19.4 KB · Views: 493
Not exactly Spike, but if they are exactly a quarter of an inch thick each (?) which they seem close to being, then they would probably be mechanical spacers for either elevation or distance. For what use I have no idea :dontknow:
 
Upvote 0
1 1/4 x 3/8 x 3/16. Sorry forgot measurement.
 
Upvote 0
Part of a printing block arrangement?
 
Upvote 0
Piece 19 has small copper taps (one broke). The black round pieces in 20 appear to be plastic. Channel on top side of 20. Weight 0.4 and 0.6 oz.
 
Upvote 0
bigfish31 said:
I'll bet there is at least 18 more, somewhere.

You're right depending on what it is there could potentially be many more :D Remeasured and the 3/16" may indicate pica measurement?

Also if 19 and 20 connected different way the channel would be inside. Could it be some sort of fusible link?
 

Attachments

  • Picture 237.webp
    Picture 237.webp
    20.6 KB · Views: 418
  • Picture 236.webp
    Picture 236.webp
    24.7 KB · Views: 408
Upvote 0
Spike, anything you can tell us about the spot where they were found that might narrow down the possibilities? Out in the middle of nowhere? Near an old house? a new one? field? etc.?
 
Upvote 0
Upvote 0
I could be way off on this one but how about part of an old xylophone.
 
Upvote 0
Mobes said:
I could be way off on this one but how about part of an old xylophone.

Good idea.. That could explain the plastic parts..

There is only a photo of the bottoms? How about one of the tops too?
 
Upvote 0
aaaaaaa said:
Mobes said:
I could be way off on this one but how about part of an old xylophone.

Good idea.. That could explain the plastic parts..

There is only a photo of the bottoms? How about one of the tops too?

Only plastic on one piece (#20). Xylophone or clock/chime work a good suggestion :icon_thumright:

Could it be weights? Could be a print block arrangement, but then why the insulator?
 

Attachments

  • Picture 238.webp
    Picture 238.webp
    22.2 KB · Views: 334
  • Picture 239.webp
    Picture 239.webp
    19.5 KB · Views: 337
Upvote 0
i'm guessing and pretty sure a post similar items been before. not sure of any way to find it though. it sure looks familiar.

good luck.
 
Upvote 0
intimer said:
i'm guessing and pretty sure a post similar items been before. not sure of any way to find it though. it sure looks familiar.

good luck.

It may be the same post you remember intimer (this one is from October).

If only these two pieces (19 & 20) I'm thinking fitting of sorts. If more than two pieces I'm leaning towards Crusaders suggestion of printing block device or scale weight device. I couldn't find an abacus that matched :D

http://scenery.cultural-china.com/en/146Scenery2771.html
 

Attachments

  • c46e84d0f9c471e53e382a3e64e2b2ef.webp
    c46e84d0f9c471e53e382a3e64e2b2ef.webp
    31.4 KB · Views: 175
Upvote 0

Users who are viewing this thread

Back
Top Bottom