1935-S Lincoln wrong planchet?

[BC1969]

This cent is a weird goldish/brassy looking coin. It weighs 2.9 grams exactly.
There is a die crack from nose to the rim.




Any idea's?

 

Amazon Forum Fav 👍

Diving for Pleasure and Treasure - Grab it through Amazon!

[BC1969]

I didn't notice the die crack at the bottom of the 5 that makes it look like a 6 lol

 

[galenrog]

Wrong planchette? I don’t think so. Thin planchette is likely. Thin planchettes were more common then than they are now. Quality control, including that for the copper alloy, was frequently put aside for the sake of cost and efficiency.

Time for more coffee.

 

[BC1969]

I don't have a micrometer handy!

 

[galenrog]

It does not take much to be 0.2 grams light. Circulation loss probably took 0.04 grams. Normally, I would need it to be a lot lighter to be a keeper.

Time for more coffee.

 

[BC1969]

I know that only a micrometer will work but I just put two 35 Lincolns next to it and took a level photo. It looks taller than the other two.
It is the middle coin.

Who knows.

 

[BC1969]

Okay, into the melt bucket it goes. Thanks.

 

[PetesPockets55]

The surface looks pretty porous which makes me think this was dug out of the ground or corroded.

 

[huntsman53]

The coin has the appearance that it was subjected to some type of corrosive. It could have been intentional or accidental, who knows! I believe that what you see as a Die Crack from Lincoln's nose to the rim, is actually a lamination crack. Remember, a Die crack will show up as raised on a coin's surfaces (fields, images, lettering, Date and any Mint Mark). A lamination crack will be level with the surfaces or below the surface unless the lamination peels and begins to separate or fold over. The piece making the "5" in the Date appear almost like a "6", is a Die Chip.

 

[BC1969]

The surface looks pretty porous which makes me think this was dug out of the ground or corroded.

There's a good chance that I cleaned it with something when I was a boy.
Going through coins I found detecting when I was a kid.

 

[BC1969]

Thanks for the replies.
What is the criteria for a die crack versus a chip?
Does anyone have a reference site for this?

 

[port ewen ace]

Thanks for the replies.
What is the criteria for a die crack versus a chip?
Does anyone have a reference site for this?

Lincolncentresource.com and error-ref.com,.... you dirty BAD BOY

 

[Dozer D]

Maybe an ACID took off some of the luster and copper.

 

[A2coins]

Smart to check but its better in hand with an expert coin dealer