35 Fe finds

[RobRieman]

I've done a lot of digging in the 35-XX range just to see what lives there. Has anyone found anything besides rusty iron? I keep hearing that people have found deep silver but I just don't see it happening.

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[Mach1Pilot]

Everytime I dig those it ends up being a large, smooth piece of iron. The lowest I have seen a coin drop on the FE scale is 26 (Etrac)

 

[masterjedi]

I've done a lot of digging in the 35-XX range just to see what lives there. Has anyone found anything besides rusty iron? I keep hearing that people have found deep silver but I just don't see it happening.

No just rusty iron here too....

 

[marjam]

Me too. And I haven't dug a ton but sometimes if it sounds real good, I will dig it. It's never been anything good, only nails, or big iron.

 

[PullTabPete]

Yeah when I get some stuff bouncing in 20-46 range and sounding pretty good I open the discrimination it starts showing in 3X-46 range I usually skip it. I dig it some times to check, but almost always old iron nails and screws. Rusty square nails aren't that exciting to me.

I don't think I ever got anything good higher than 21 or 22 on FE side.

HH,

Pete

 

[DeepseekerADS]

I really don't pay any attention to the FE-CO scale, if it sounds right to me I dig it.

The only exception was Thursday when I'd dug so darned many zincolns I didn't want to dig anymore.

 

[RobRieman]

I really don't pay any attention to the FE-CO scale, if it sounds right to me I dig it.

The only exception was Thursday when I'd dug so darned many zincolns I didn't want to dig anymore.

With an open screen the iron with the high tones in the 30-35 Fe zone sound the same to me as the high tones on the 12 line. If I dug everything that sounded good I would only need one place to hunt and would never make it to the other side. [emoji31]

 

[RobRieman]

Yeah when I get some stuff bouncing in 20-46 range and sounding pretty good I open the discrimination it starts showing in 3X-46 range I usually skip it. I dig it some times to check, but almost always old iron nails and screws. Rusty square nails aren't that exciting to me.

I don't think I ever got anything good higher than 21 or 22 on FE side.

HH,

Pete

Same here. I don't think I've ever found a US coin above 15 Fe.

 

[PullTabPete]

With an open screen the iron with the high tones in the 30-35 Fe zone sound the same to me as the high tones on the 12 line. If I dug everything that sounded good I would only need one place to hunt and would never make it to the other side. [emoji31]

I use Multi-tone and agree to me 12-47 sounds the same as 35-47. I am sure some people hear better than me.

I have hit US coins above 15 FE but they were pretty deep and bouncing between 11 and 21 FE until I start digging