A bit of cellar hole hunting. Colonial buckle and more...

CrazySlasher

Hero Member
Joined
Jul 6, 2010
Messages
734
Reaction score
96
Golden Thread
1
Location
SS of MA.
🥇 Banner finds
1
Detector(s) used
Minelab CTX 3030, Minelab E-Trac w/Sunray probe and 15' WoTcoil.
Primary Interest:
All Treasure Hunting
My detecting partner and I went deep into the woods today and found a couple cellar holes. Any idea on the age of the buckle? The button says Treble Gilt Tops, I don't know anything about buttons and can't get an id on it. The second shotgun shell is interesting too. Has a cool design on it and looks old as the dirt I pulled it from. The sites were poison ivy and iron infested. Very difficult detecting so we didn't even scratch the surface.
 

Attachments

  • colonialbuckl1.webp
    colonialbuckl1.webp
    14 KB · Views: 878
  • colonialbuckle2.webp
    colonialbuckle2.webp
    16.4 KB · Views: 886
  • colonialbuckle3.webp
    colonialbuckle3.webp
    14.3 KB · Views: 880
  • button1.webp
    button1.webp
    10.9 KB · Views: 888
  • button2.webp
    button2.webp
    7.1 KB · Views: 889
  • shell2.webp
    shell2.webp
    7.5 KB · Views: 881
  • thingy.webp
    thingy.webp
    12.7 KB · Views: 884
  • button3.webp
    button3.webp
    8.8 KB · Views: 917
  • shell3.webp
    shell3.webp
    8.8 KB · Views: 874
  • shell4.webp
    shell4.webp
    4.1 KB · Views: 876
  • shell5.webp
    shell5.webp
    5.9 KB · Views: 876
  • shell6.webp
    shell6.webp
    4.7 KB · Views: 879
Upvote 0
Nice buckle. Hope you can find more in the fall...when the poison ivy dies down.

The head stamps for the shotgun shells can be readily identified at the following site:

http://members.shaw.ca/cartridge-corner/shotgun.htm

Looks like they may be from the early 1900's to about mid- 30's. While some people here don't really like hitting them when they detect (like getting pull tabs), I do. Plus, if some one was hunting in the area, they were bound to drop something along the way. Made some good finds (for me) as a result.

Good luck on the hunt.
 

that's a sweet buckle! too bad the chappe is busted off.still a beautiful 1700's shoe buckle! :thumbsup:
 

HEAVYMETALNUT said:
that's a sweet buckle! too bad the chappe is busted off.still a beautiful 1700's shoe buckle! :thumbsup:

What is the chappe?
 

Yup defenitly 1700's. And a nice one at that. Always good to find one that complete. :thumbsup:
 

That buckle is a beauty!
 

Nice buckle. Late 1700's. Congrats Hogge :headbang:
 

FANTASTIC buckle!

The photo you have titled "thingy" I am almost positive is the top of a suspender clip. It is not a style I have seen or dug before, but the two little "wings" with holes in them on either side is a dead giveaway that the crossbar would've gone through the back and gripped the fabric of the suspender.

Cheers,


Buckleboy
 

That is one sweet looking buckle !!!! I would keep pounding that place :o dig everything that beeps ! Great recovery ,CrazySlasher :icon_pirat: CMD
 

that buckle is sweet!!!!!!! MR TUFF
 

Love the look of that great looking early buckle CrazySlasher :icon_thumright:

Here is what I could find on "chappe", hope it helps.

Chapes or "caps" of various designs could be fitted to the bar to enable one strap end to be secured before fastening the other, adjustable end. This made buckles easily removable and interchangeable leading to a significant advantage since buckles were expensive. Unfortunately, the teeth or spikes on the semi-circular chapes damaged the straps or belts, making frequent repairs of the material necessary. Buckles fitted with the “T”-, anchor-, or spade-shaped chapes avoided this problem but needed a slotted end in the belt to accommodate them.

Again Congratulations, :notworthy:
Dave
 

Antiquarian said:
Love the look of that great looking early buckle CrazySlasher :icon_thumright:

Here is what I could find on "chappe", hope it helps.

Chapes or "caps" of various designs could be fitted to the bar to enable one strap end to be secured before fastening the other, adjustable end. This made buckles easily removable and interchangeable leading to a significant advantage since buckles were expensive. Unfortunately, the teeth or spikes on the semi-circular chapes damaged the straps or belts, making frequent repairs of the material necessary. Buckles fitted with the “T”-, anchor-, or spade-shaped chapes avoided this problem but needed a slotted end in the belt to accommodate them.

Again Congratulations, :notworthy:
Dave

I found this buckle a couple months back. I'm assuming what I circled is the "chape" then.

Also, at this site we found a ton of salt glaze pottery shards and broken glass in one area. I know the area was occupied from the 1700's to the early 1900's. Right next to that is where I found the buckle and button. If that area was the dump, should I just start digging or is there a particular way to I should go about it?
 

Attachments

  • buckle234234.webp
    buckle234234.webp
    34.7 KB · Views: 314
This is the reason why I eat, sleep, and breath metal detecting. :hello2: I would take that Colonial shoe buckle and smile all the way to my home. :icon_thumleft:

Kirk
 

that is an awesome buckle! congrats
 

Thank you guys for all the kind replies. Hopefully there will be a lot more where that came from. Does anyone have an idea on that button? Does "treble gilt tops" mean anything?
 

Great buckle...found many halves and pieces to buckle very similar to that one but never whole!

WTG
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top Bottom