anyone using a Cors coil on a Teknetics Omega?

relicmeister

Bronze Member
Jul 26, 2012
2,205
2,120
Poconos, Nw.NJ & Delaware Valley
Detector(s) used
XP Orx Deus II, 9” coil
Primary Interest:
Relic Hunting
I'm thinking of getting a Cors 12.5 x 8.5 DD coil as an upgrade for my Omega. I now have the 10"x 5" elliptical concentric and the
10"x5" elliptical DD but sometimes want greater ground coverage. The Cors coil is very reasonable ($124) and there is a 13.5 x 11.5 one for $150) also available but I think I'd prefer the elliptical one. Any thoughts on the Cors brand of coils?
 

OP
OP
relicmeister

relicmeister

Bronze Member
Jul 26, 2012
2,205
2,120
Poconos, Nw.NJ & Delaware Valley
Detector(s) used
XP Orx Deus II, 9” coil
Primary Interest:
Relic Hunting
Decided to get one quality seems fine to me. After a couple of trials I wouldn't
Hesitate to recommend it - really can't
Beat the price
 

xxJimboxx

Jr. Member
Nov 19, 2014
26
3
Rio Rancho New Mexico
Detector(s) used
TEK 4000,TEK G2, Makro Pointer
Primary Interest:
All Treasure Hunting
Im getting ready to order one for my G2 ive owned two other NEL coils that have been good the sharpshooter and the tornado... the sharpshooter developed a glitch at the connector to the box after a year, but I cut down the wires and resoldered them now it works fine. The tornado worked great and deep but not well in tight spots, big and round... From what I understand NEL and CORS are the same company but NEL is imported by golddiggers and CORS by seriousdetecting there was some kind of controversy going on with golddiggers or something I heard, so NEL decided to change their name and distribute elsewhere??
 

OP
OP
relicmeister

relicmeister

Bronze Member
Jul 26, 2012
2,205
2,120
Poconos, Nw.NJ & Delaware Valley
Detector(s) used
XP Orx Deus II, 9” coil
Primary Interest:
Relic Hunting
Don't know the deal on NEL vs CORS but I will say that the coil works quite well on my Omega. On Christmas eve I was at a heavily hunted site
that I've found Colonial era buttons and coins, and foun d a large Tombac dandy at 12" plus deep. I have found no quality issues with this coil
well worth the $125 it cost me.
 

Top Member Reactions

Users who are viewing this thread

Top