At Pro for tall people?

[mtcooley]

I am thinking about getting a Garrett AT Pro and I am 6'5" tall. Does the atpro adjust to accommodate a taller person?

 

[SusanMN]

Look at the specs for the detector. Usually it will say maximum and minimum height. Also check to see if they sell a "tall" rod. I have the opposite problem, under five feet, and have found that adjustability varies from detector to detector, and had to buy a "short" rod for my minelab.

 

[Gold_and_Silver]

Specifications
Target ID Cursor Segments 12 (notchable)
Iron Discrimination Segments 40
Accept/Reject Discrimination Yes
Search Modes 6 (3 Standard, 3 Pro modes)
Sensitivity/Depth Adjustments 8
Electronic Pinpointing Yes
Frequency 15 kHz
Audio Tone ID Levels 3
Standard Searchcoil 8.5" x 11" DD PROformance
Length (Adjustable) 42" to 51" (1.06m - 1.29m)
Total Weight 3.03 lbs. (1.4 kgs.)
Batteries 4 AA (included)
Warranty 2 Year, Limited Parts/Labor

 

[junkless]

I'm 6'5 and have the at pro. I have no issues and it seems longer than my old Bh platinum. I've got it maxed but its plenty long.

 

[Chug And Red]

6' 4" Here No problems Swinging The Pro Chug

 

[badpenny]

No problems 6'4" and it works great and Garrett CS is excellent if you need them.

 

[diggummup]

Has anybody actually had a problem with a detector that won't open long enough? I've only owned a few detectors, couple BH's, a couple Fisher's, a Garrett's and a Tesoro, but I haven't had any issues with any of the detectors i've ever owned.

 

[Wyomingmedic]

Has anybody actually had a problem with a detector that won't open long enough? I've only owned a few detectors, couple BH's, a couple Fisher's, a Garrett's and a Tesoro, but I haven't had any issues with any of the detectors i've ever owned.

I'm 6'5" as well, and I had issues with my White's Prizm years ago.

I now use a CTX at it's maximum height setting. If I were any taller, it would be too short. Fortunately, I will shrink as I get older (statistically speaking).

WM