What's new

AT Pro Lesson learned

GRiley

Full Member
Joined
Apr 15, 2013
Messages
233
Reaction score
92
Golden Thread
0
Location
North Central Indiana
Detector(s) used
Whites Coinmaster 6000/DI Series 3
Whites 6000/DI Pro SL
Garrett AT Pro
Primary Interest:
Metal Detecting
Hi,
I have an extra battery pack for the AT pro. I plan to carry when detecting. Well I put a set of fresh batteries in it and put it in my pocket with my change in it. Well in about 5 minutes my pocket was burning hot and I have a big red welt on my leg. Yep the change shorted out the pack. The batteries were to hot to handle. Lesson learned.......GRiley
 
outstanding.gif
Thanks for sharing GRiley - never gave it a thought...
 
Wooow ill b sure not to do that lol
 
Been there done that...
 
I too have done this in the past..
A little electrical tape over the contacts and you're good to go.
 
:laughing7:....sorry to laugh, but that has happened to me a few times, and will probably happen again.
 
I should have also added... If you're not comfortable with electrical tape, some 9volts come with caps on them, usually when purchased in bulk boxes but you can probably buy them separately. This is what I use now and they fit perfectly. I cap them and put a piece of elec. tape over the cap to ensure it stays on. Yes this may seem like overkill but I'm a bit anal about these things.:dontknow:

HH
Chris
 
Did that with a 9V one time!
Yes, Lesson learned! LOL
 

Users who are viewing this thread

Back
Top Bottom