bounty hunter platinum vs very rocky terrain

Coldshot

Jr. Member
Joined
Mar 29, 2012
Messages
22
Reaction score
0
Golden Thread
0
Primary Interest:
All Treasure Hunting
This is not my first detector but it is my first time detecting under these condition's. I am in noth east oklahoma and the soil here is very very rocky. The ground grab seem's to work fine and balance's out well but I got a reading on a quarter the first time out and it indicated it was three inches under ground, after digging the three inches and finding nothing I got the same reading at the same three inches. It was the only reading with in a square foot area so i continued digging. After digging in very rocky ground (hard digging) I still get the same reading.( over a foot deep) It is not a used detector and is brand new, so what is wrong here? Any one ever have similiar problem's. Maybe just a bad machine straight out of the box, but hopefully not. Shipping waiting and reshipping would be a good portion of my summer down the tubes. What would you recommend I do. Is it just the wrong machine for this type of soil or the detector or the user? Thank you for your time and happy digging........ Danny
 

The problem.. (I'm NOT trying to be a jerk or inflammatory here, just speaking out of 20 years experience) is the machine.
Bounty hunters are FINE coin shooters, but no matter WHAT model, they SUCK in adverse ground. I would try to return it if you can, for say an Ace 250 or a White's coinmaster. Both cost about the same and are better machines.
 

Thank's I figured it was the machine. I still have my vintage metered whites so I will get it out and put it back to use I was also thinking maybe garretts, or the whites coin master pro, I am not a full time hunter just like to pass the time and fill my wall's with stuff I have found. I have yet to sell any thing as they mean a little to me since I did take the time to dig them up. Thank's again.............
 

No problemo.. And that White's, even though "vintage", will probably give you better performance than you think.
I still have a Bounty Hunter sharpshooter that I use as a backup and to loan out, it was my first machine. Like I said, it was GREAT for "normal" ground, but VERY frustrating in rocky or highly mineralized ground.
 

without being a bother to ya you think a different coil would matter? does BH have a solid coil?
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom