Civil War New York button cleaning. Aluminum Jelly @ its best !

DirtyMike

Hero Member
Joined
Feb 10, 2009
Messages
898
Reaction score
105
Golden Thread
1
Location
West Virginia
🥇 Banner finds
1
Detector(s) used
Teknetics T2, MXT, TDI, Tejon, AT Pro
Primary Interest:
All Treasure Hunting
Light application of the aluminum jelly with a soft bristle tooth brush. Soak for a few minutes then rinse with water. Another light application, soak and rinse off. Dry carefully!
 

Attachments

  • relics 017.webp
    relics 017.webp
    37.3 KB · Views: 470
  • relics 020.webp
    relics 020.webp
    27.9 KB · Views: 420
  • relics 017.webp
    relics 017.webp
    37.3 KB · Views: 352
  • relics 017.webp
    relics 017.webp
    37.3 KB · Views: 347
  • relics 018.webp
    relics 018.webp
    38 KB · Views: 372
  • relics 021.webp
    relics 021.webp
    52.9 KB · Views: 518
  • relics 024.webp
    relics 024.webp
    33.4 KB · Views: 381
  • relics 025.webp
    relics 025.webp
    35 KB · Views: 357
  • relics 026.webp
    relics 026.webp
    25.4 KB · Views: 382
  • relics 028.webp
    relics 028.webp
    29 KB · Views: 406
I will try that!
 
Can you use that to clean silver and copper coins? Just curious....
 
Newfiehunter said:
Can you use that to clean silver and copper coins? Just curious....
No
 
DirtyMike said:
Newfiehunter said:
Can you use that to clean silver and copper coins? Just curious....
No


You can use it on silver but do a test run, will really shine them up!
 
Dirtymike, if you give a button like that a good cleaning with peroxide first to get the tough crud off, all the green will be gone after the jelly treatment. When you go to something harsh right away you often can't get 100% of it off because exposure time is always on your mind. Also, the peroxide is a very good test to see if there's enough gilt to want to use something like the jelly. After the hp brush and soak, if you determine the button is better with a green patina you just continue to clean but let air dry. It's a good step because some buttons are a total gamble to use the jelly on, and an even green patina is often much nicer than randon spots of gilt.
 
Iron Patch said:
Dirtymike, if you give a button like that a good cleaning with peroxide first to get the tough crud off, all the green will be gone after the jelly treatment. When you go to something harsh right away you often can't get 100% of it off because exposure time is always on your mind. Also, the peroxide is a very good test to see if there's enough gilt to want to use something like the jelly. After the hp brush and soak, if you determine the button is better with a green patina you just continue to clean but let air dry. It's a good step because some buttons are a total gamble to use the jelly on, and an even green patina is often much nicer than randon spots of gilt.
IP, Thanks so much for the help. I have enjoyed your post and learned alot from them. I will be trying out this method tonight. Thanks again. Mike
 
Where in the world do you find aluminum jelly, all I can find is Naval Jelly for iron. Have you tried searching local hardwares and box outlets, the stores tell me that it has been discontinued.........NGE
 
nowgittineverything said:
Where in the world do you find aluminum jelly, all I can find is Naval Jelly for iron. Have you tried searching local hardwares and box outlets, the stores tell me that it has been discontinued.........NGE
ace hardware stores

was wondering if navel jell would work on coppers?
 
Ace is the Place that told me it was discontinued, so I went to Lowe's, Home Depot, Sears, all said it was discontinued. Only reference I saw about it was online and it was really expensive plus shipping it was something like 25 bucks for 4oz. :tongue3:......NGE
 

Users who are viewing this thread

Back
Top Bottom