✅ SOLVED Copper/brass thingie

[steelheadwill]

Never saw anything like this, the chain remnants and different number of holes on each side are interesting, any ideas? thanks all, Herbie.

 

[vhs07]

Sprayer nozzle

 

[vhs07]

Similar to this one on Ebay

 

[steelheadwill]

Fast work vhs07. Green check and thank you!!

 

[Got_4by4]

You would be hard pressed to convince me unless you can show me a link or picture of a similar "DOUBLE
NOZZLE" set up.
This item must have 2 different deliveries. the chain attached would prevent turning as fine as the threads appear to be.
Also note the penny shown for reference. The threads have to be appx. 1/2", much larger than the sprayer shown.
I need more proof.

 

[steelheadwill]

Got_4X4, you present some good points, I looked quickly at the example pic and it appeared to be double headed, Now I'm not so sure.

The threaded holes are 1/2" and the outlet holes are fairly large and would produce a single and double stream rather than a spray with a low volume pump.
Well, anyone else got ideas? Thanks All!!

You would be hard pressed to convince me unless you can show me a link or picture of a similar "DOUBLE
NOZZLE" set up.
This item must have 2 different deliveries. the chain attached would prevent turning as fine as the threads appear to be.
Also note the penny shown for reference. The threads have to be appx. 1/2", much larger than the sprayer shown.
I need more proof.

 

[mojjax]

Here Ya go --- http://www.treasurenet.com/forums/what/154308-very-unusual-brass-piece.html?highlight=indian+pump

 

[steelheadwill]

Spot on Mojjax
VHS was on the right track, you had it nailed already for Mainerelic,
he's just up the road a bit from me too.

thanks to everyone who looked and commented! Herbie.